Assembling Your Tufting Frame
Watch our helpful videos to learn how to easily assemble your tabletop tufting frame. You will need the tool kit we have included.
For the assembly you will be using the included T20 tool head
- Step 1: Lay out frame as shown below (Base A on the bottom, Side B on the left, Side C on top, Side D on the right)
- Step 2: Use the tool to screw in the 8 longer screws to attach the pieces together. We like to screw them through the first piece of wood, then guide it towards the second piece using our marked pilot holes.
- Step 3: Use the tool head to attach the yarn guide with the 2 shorter screws as shown. Ensure that the loops are facing down
- Step 4: We will now attach the carpet tacking strips. They are labeled to the corresponding sides. Make sure that the spikes are facing outwards, away from the boards. Base A has two strips. Strike the nails in with a hammer (not the little spikes). Congrats on your new Tuft Love Tufting Frame!